Showing posts with label 2010. Show all posts
Showing posts with label 2010. Show all posts

2010 Yamaha YZF R6 Motorcycle Review

by 3:00 AM
2010 Yamaha YZF-R6

2010 Yamaha YZF-R6

2010 Yamaha YZF-R6

2010 Yamaha YZF-R6

2010 Yamaha YZF-R6 Motorcycle - Specification and Review

2010 Yamaha YZF-R6 is a vehicle with engine capacity of 599cc (600cc) DOHC 16-valve, turn the machine can reach 15,000 rpm and with a full fuel injection and a strong chassis, aerodynamics in a wind chop on the track. In 2010 Yamaha YZF-R6 there are some new features, or more exactly an improvement from the previous one. In 2010 Yamaha YZF-R6 you can see the changes made to the exhaust so not too noisy and reduce exhaust emissions, ECU has been revised to improve the work, revise the Yamaha Chip Controlled Intake. With all the improvements made to 2010 Yamaha YZF-R6 is much better and perfect than its predecessor. For electronic technology 2010 Yamaha YZF-R6 modeled many of the technologies used Yamaha YZR-M1 in motogp. If you are interested in the 2010 Yamaha YZF-R6 and want to know more about the data and specifications, you can see it in full below.

2010 Yamaha YZF-R6 Specifications

Engine
Type 599cc liquid-cooled inline 4-cylinder; DOHC, 16 titanium valves
Bore x Stroke 67.0 x 42.5mm
Compression Ratio 13.1:1
Fuel Delivery Fuel Injection with YCC-T and YCC-I
Ignition TCI: Transistor Controlled Ignition
Transmission 6-speed w/multiplate slipper clutch
Final Drive Chain

Chassis
Suspension/Front 41mm inverted fork; 4-way adjustable, 4.7-in travel
Suspension/Rear Single shock; 4-way adjustable, 4.7-in travel
Brakes/Front Dual 310mm floating disc; radial-mount 4-piston calipers
Brakes/Rear 220mm disc; single-piston caliper
Tires/Front 120/70-ZR17
Tires/Rear 180/55-ZR17

Dimensions
Length 80.3 in
Width 27.6 in
Height 43.3 in
Seat Height 33.5 in
Wheelbase 54.3 in
Rake (Caster Angle) 24°
Trail 3.8 in
Oil Capacity (with oil filter change) 3.6 qt
Fuel Capacity 4.5 gal
Fuel Economy** 40 mpg
Wet Weight 417 lb

Features and Benefits
Key Features:
  • YCC-I®, Yamaha Chip Controlled Intake, is used on the R6 to vary intake tract length for excellent cylinder filling and a broader powerband. On the higher-revving R6, its benefits are even more pronounced.

  • The YZF-R6 was the first production motorcycle with a fly-by-wire throttle system-for flawless response under all conditions.

  • Back torque-limiting slipper-type clutch greatly facilitates braking/downshifting from high speed. Close-ratio 6-speed transmission delivers seamless power and maximum acceleration.

  • Light, powerful, and bristling with knowledge gained from years of racing, the YZF-R6 is the most advanced production 600cc motorcycle Yamaha-or anybody else-has ever built.


Engine:
  • YCC-I-Yamaha Chip Controlled Intake electronically varies intake tract length for a broader powerband.

  • YCC-T uses a powerful ECU and multiple sensors to provide perfect, smooth engine response and optimal power whenever the throttle is twisted under all conditions.

  • Fuel injection mapping for the YCC-T-Yamaha Chip Controlled Throttle dual-injector system complements the high compression ratio for great throttle response and reduced engine braking.

  • Compact, lightweight 67mm x 42.5mm, 599cc DOHC 16-valve, liquid-cooled titanium-valved four-cylinder has a compression ratio of 13.1:1, for great response. Domed pistons with valve cutouts produce a compact combustion chamber.

  • GP-style titanium muffler contributes to mass centralization and contains EXUP® for a broad powerband, and 02 sensor for spot-on injection and emissions compliance.

  • Twin-injector fuel injection: shower-type injectors above each intake funnel help achieve optimum fuel atomization at high rpm.

  • Direct-ignition coils, dual-electrode spark plugs and high-output magneto deliver extremely accurate, reliable firing.

  • Slipper-type back torque-limiting clutch greatly facilitates braking and downshifting from high speed. Close-ratio six-speed transmission delivers seamless power and maximum acceleration.

2010 Kawasaki KX450F Specifications Kawasaki Off Road Motorcross

by 10:15 PM


Kawasaki KX450F specifications:
  • Engine Liquid-cooled, four-stroke single with DOHC and four valves

  • Displacement 449cc

  • Bore x stroke 96.0 x 62.1mm

  • Compression ratio 12.5:1

  • Fuel Injection 43mm Keihin Throttle body

  • Ignition Digital DC-CDI

  • Five-speed Transmission

  • Rake / trail 26.7 degrees / 4.6 ins.

  • Front suspension / wheel travel 48mm inverted, GS AOS with DLC coated sliders, 22-position compression and 20-position rebound dampening adjustments / 04.12 ins.

  • Rear suspension / wheel travel contract UNI-GS ® linkage system and shock with 22-position low-speed and stepless high-speed compression dampening, 22-position rebound dampening and fully adjustable spring preload / 12.4 ins.

  • Front tire 90/100-21

  • Rear tire 120/80-19

  • Front brake Single semi-floating 250mm petal discs with dual piston caliper

  • Rear brake Single 240mm petal disc with single-piston caliper

  • Overall length is 86.0 ins.

  • Overall width 32.3 ins.

  • Overall height 50.4 ins.

2010 Kawasaki Ninja ZX 10R With the New Feature Specification

by 1:30 PM
2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R is the latest vehicle for SupersPort class. 2010 Kawasaki Ninja ZX-10R which has a capacity of 998cc engine, Four-stroke, liquid-cooled, DOHC, four valves per cylinder, inline-four. Labor force that offers exceptional but still provide comfort and control to the rider. With better aerodynamics to 2010 Kawasaki Ninja ZX-10R is more rapid and maximal at the energy issue because his prowess in cutting the wind, both on the track straight and when cornering, without reducing the speed to a low point. In 2010 Kawasaki Ninja ZX-10R is a new fitu, one of which is an electronic device called KIMS (Kawasaki Ignition Management System) that serves to share power with maximum control. For example, KIMS can monitor all input and output data such as engine speed, throttle position, vehicle speed, position equipment and feedback from the intake air temperature, intake air pressure, engine temperature and O2 sensors. In addition KIMS is also programmed to prevent the ignition when the engine rpm rises above the program parameters. This is useful for ease, comfort, safety for motorists. 2010 Kawasaki Ninja ZX-10R a great and sophisticated sold for $ 12,999 - $ 13,199. For complete data on the Kawasaki Ninja ZX-10R specifications you can see below.

2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R


2010 Kawasaki Ninja ZX-10R - Specifications
  • Engine: Four-stroke, liquid-cooled, DOHC, four valves per cylinder, inline-four

  • Displacement: 998cc

  • Bore x Stroke: 76.0 x 55.0mm

  • Compression Ratio: 12.9:1

  • Fuel System: DFI with four 43mm Keihin throttle bodies with oval sub-throttles, two injectors per cylinder

  • Ignition: TCBI with digital advance and Kawasaki Ignition Management System (KIMS)

  • Transmission: Six-speed

  • Final drive: Chain

  • Rake / Trail: 25.5 degrees / 4.3 in.

  • Front Tire: 120/70 ZR17

  • Rear Tire: 190/55 ZR17

  • Wheelbase: 55.7 in.


Front Suspension / Wheel Travel: 43mm inverted fork with DLC coating, adjustable rebound and compression damping, spring preload adjustability and top-out springs / 4.7 in.

Rear Suspension / Wheel Travel: UNI-TRAK® with top-out spring, stepless, dual-range (low-/high-speed) compression damping, stepless rebound damping, fully adjustable spring preload / 4.9 in.

Front Brakes: Dual semi-floating 310mm petal discs with dual four-piston radial-mount calipers
Rear Brakes: Single 220mm petal disc with aluminum single-piston caliper
Overall Length: 83.1 in.
Overall Width: 28.0 in.
Overall Height: 44.7 in.
Seat Height: 32.7 in.
Curb Weight: 458.6 lbs.
Fuel Capacity: 4.5 gal.
Color Choices: Metallic Spark Black, Lime Green/Pearl Stardust White
Warranty 12 months
Good Times™ Protection Plan

2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R

2010 Kawasaki Ninja ZX-10R
New Features for 2010 :
Four-Cylinder, DOHC 998cc Engine
  • Oil is routed through channels milled into the cases on various parts of the engine, eliminating external oil lines and reducing weight

  • Lightweight crankshaft maintains the same inertial moment as a heavier design but saves about two pounds compared to a conventional crank

  • Very compact, narrow and lightweight design makes it possible to position the engine perfectly within the chassis for optimal weight distribution

  • One-piece upper crankcase and cylinder casting saves weight and offers maximum rigidity

  • Specially designed internal fins on the liquid-cooled, aluminum oil cooler promote high-efficiency heat dissipation

  • Stacked, triangular layout of crank axis, input shaft and output shaft reduces engine length and aids mass centralization for quick handling

  • Water pump uses the same type impeller as the ZX-14, with pump rpm optimized for reduced friction

  • A lightweight Denso radiator with tightly packed cores provides the most efficient engine cooling possible

  • Low friction oil pump reduction ratio reduces parasitic power loss

  • Refinements to the shift ratchet assembly, shifting arm, return spring and collar result in reduced friction and less movement at the shift shaft pivot, for improved shifting feel and more positive gear changes

  • Slightly longer throttle cables inside a plastic throttle housing provide improved throttle action for even greater control

  • A new, embossed metallic gray coating on the muffler complements the new bodywork

  • A new, 18-position Öhlins steering damper uses additional spring and oil pistons for improved action; titanium color and a laser-etched logo enhance the bikes appearance

  • Aggressive new styling of the upper, side and center fairings and cockpit inner covers enhances aerodynamic efficiency and appearance


Fuel Injection
  • Oval cross-sectioned throttle bodies allow very precise throttle control and instant response

  • Secondary fuel injectors improve top-end power output and power characteristics at high rpm. Lower injectors are always on, upper injectors come on as needed according to degree of throttle opening and engine rpm


Cylinder Head
  • Intake and exhaust valves are titanium for reduced reciprocating weight and higher rpm capabilities

  • High-lift camshafts are designed to deliver more power at high rpm and make it easier to tune the engine for racing

  • Exhaust ports that are narrower at the midpoint and larger at the opening promote high exhaust velocity and efficient scavenging

  • Intake ports, exhaust ports and matched combustion chambers are designed for optimum flow efficiency and high top-end power


Suspension
  • A four-way adjustable rear shock features dual (low- and high-speed) compression damping as well as rebound damping and spring preload adjustment - allowing the fine tuning required for racing

  • Bottom-mounted springs are completely submerged in oil for reduced frothing, improved damping performance, superior fork action and road-following ability

  • Kawasaki Genuine Accessory shims are available for quick rear ride height changes at the track

  • DLC (Diamond-like Carbon) fork tube coating on the fully adjustable 43mm inverted fork sliders improves fork action by providing reduced friction, smoother action and better road holding


Air Intake
  • Designed not to interfere with the riders intentions, the complex ECU program assumes all rider inputs are intentional. However, when a change in engine speed exceeds the predicted response for given parameters, KIMS will slow the ignition timing to reduce power

  • Use of a compact, flat-type fuel pump that takes up less fuel tank space leaves room for a large, efficient airbox

  • In addition to standard fuel injection system inputs (engine speed, throttle position, vehicle speed, gear position, intake air temperature, intake air pressure, engine temperature and O2 sensors), KIMS monitors the rate of rpm change every 0.02 seconds

  • Oval-section intake funnels promote non-turbulent flow at all rpm


KIMS Ignition
  • Kawasaki Ignition Management System (KIMS) helps curtail sudden spikes in engine speed, enhancing the riders control of power delivery

  • Adjustment of KIMS parameters is possible with an accessory racing (circuit-use only) kit installed

  • A highly efficient, center-located Ram Air intake duct is shaped for lower intake noise and higher intake efficiency


Chassis
  • Lightweight, two-piece, aluminum die-cast sub-frame is mounted to the frames upper cross member, so rear suspension feedback is transmitted more directly to the rider

  • Ribbing on the interior of the pivot plate where it joins the frames upper cross member slightly slows down the frames feedback for highly accurate steering feel

  • Swingarm pivot located to aid with the front-rear weight balance

  • Unique twin-spar aluminum frame features an optimized stiffness balance through a mixture of materials, shapes and thicknesses for superior handling and bump absorption

  • Narrow sub-frame layout contributes to the compact and slim tail section


Exhaust System
  • A palladium catalyzer helps the ZX-10R meet strict Euro-III exhaust emissions standards

  • A single orthogonal, titanium silencer with a new, black finish keeps the center of gravity low and improves exhaust efficiency

  • An exhaust pre-chamber under the engine reduces exhaust noise, minimizes silencer volume and enhances mass centralization for maximum flickability


Race-quality Steering Damper
  • A pair of 5.5mm thick, 310mm petal discs provides the heat dissipation needed to maintain brake feel and responsiveness during extended heavy use

  • A 220mm rear petal disc gripped by a single-piston caliper provides excellent feel and feedback

  • Tokico radial-mount brake calipers use dual pads for superb initial bite, increased control and progressive feel

  • A radial-pump front master cylinder provides the ultimate in front brake feel and feedback

  • A new 18-position adjustable Öhlins steering damper is fitted as standard equipment to help ensure stable front end feedback even under racing conditions


Brakes
Aerodynamic Bodywork
  • A recess on the top of the fuel tank accommodates the helmets chin, so its easier to tuck-in behind the windscreen at speed

  • An LED tail light makes the bike more visible to drivers and provides the final styling flourish to the evocative Ninja design

  • Slimmer than ever in new aerodynamic bodywork, the ZX-10R is designed to slice through the atmosphere cleanly at high speed with minimal turbulence

  • The front fender aids cooling efficiency by directing air toward the radiator

  • A large, rear inner fender keeps the bike cleaner and allows the mud flap to be smaller and less obtrusive, further improving aerodynamic qualities around the rear of the machine

  • Mirrors, license plate holder and rear turn signals are easily removable for track day prep

  • High mounting position of mirrors, with integrated turn signals, provides excellent rearward visibility and helps to minimize damage if the bike falls over

  • The flush surface of the tails underside reduces turbulence at the rear of the bike and ensures laminar airflow around the seat


Advanced Electronic Instrumentation
  • The ZX-10Rs big tachometer "green zone" makes keeping the engine in the meatiest part of its massive powerband even easier

  • Multifunction odometer, tripmeter, clock and lap timer/stopwatch are all intuitively easy to use

  • The easy-to-read instrument cluster uses UV-blocking glass, for maximum visibility

2010 Honda VFR1200F Motorcycle Revealed

by 2:00 AM




2010 Honda VFR1200F Motorcycle Revealed

This is one of the honda motor is very attracted worldwide attention. That is because the Honda applicable VFR1200F a new technology which would later become one of the foundations for the development of motor technology in the future.Conceptually, dual-clutch tech is simple: a pair of clutches split the power transmission between odd- and even-numbered gears. If youre, say, accelerating in second gear, third gear is already engaged but the odd clutch is disengaged. When you want to upshift, you touch a paddle on the left bar, and in an instant the even clutch disengages and the odd one engages. Theres no detectable interruption in power to the rear wheel. Such systems have been around for quite a while in racing cars and are about to become fairly common in some run-of-the-mill production cars, like the Ford Focus. However until now, no one but Honda has managed to make one small enough for motorcycle use.This VFR1200F Honda has lots of advantages, some of the advantages that you can see full below. But for those who want to have a Honda VFR1200F should not cost you a bit and also have to be patient because for Honda VFR1200F not available in significant amounts, even honda did not guarantee a stock at the beginning of the year.

Features/Benefits

- Honda MotoGP V-4 engine technology and architecture bring cutting-edge performance to the VFR1200F.
- Unique cylinder layout with rear two cylinders located innermost on the crankshaft and front cylinders located outboard narrows the rider interface aboard the VFR1200F.
- Throttle By Wire for next-generation throttle response.
- Optional Dual Clutch Automatic Transmission with manual mode and automatic mode with two D/S modes and paddle-style shifters offers unparalleled freedom through innovative technology.
- Next-generation shaft drive system with offset pivot point and sliding constant-velocity joint for a new level of shaft-drive performance and control.
- Transferable one-year, unlimited-mileage limited warranty; extended coverage available with a Honda Protection Plan.

Engine/Drivetrain
- Light and compact 1237cc liquid-cooled 76-degree V-4 pumps out amazing levels of power with a distinctive V-4 feel and sound.
- Symmetrically Coupled Phase-shift Crankshaft uses 28-degree crankpin offset to eliminate primary engine vibration.
- Asymmetrical exhaust lengths between front and rear cylinders boost power production and enhance power feel.
- Lightweight and compact Unicam® valvetrain allows for significantly smaller cylinder heads.
- Honda slipper clutch in manual-shift model allows unencumbered sport riding.

Chassis/Suspension
- GP technology layer-concept aero fairing for unrivaled air management.
- Honda Pro Arm® single-sided swingarm with single gas-charged shock delivers cutting-edge rear suspension action; features handy remote spring preload adjuster, rebound damping adjustability and 5.1 inches of travel.
- Stout, sport-oriented 43mm inverted cartridge fork with spring preload adjustability and 4.7 inches of travel.
- New controls with smoother and more precise tactile feel enhance the riding experience.
- New-technology seat construction permits a higher level of seat shaping and forming details.
- Saddlebag mounts come standard on both versions of the VFR1200F.

And this is a complete specification data on the Honda VFR1200.

Specifications
Honda VFR1200F / VFR1200F with Dual Clutch Automatic Transmission
Engine Type: 1237cc liquid-cooled 76° V-4
Bore and Stroke: 81mm x 60mm
Compression ratio: 12.0:1
Valves: SOHC; four valves per cylinder
Induction: PGM-FI 44mm throttle bodies
Ignition: Digital electronic
Transmission: 6-speed (VFR1200F) / Six-speed automatic with two modes and manual mode (VFR1200F with DualClutch Automatic Transmission)
Final Drive: Shaft

Suspension
Front: 43mm; 4.7 inches travel
Rear: Pro Arm single-side swingarm with Pro-Link® single gas-charged shock; 5.1 inches travel

Brakes
Front: Dual 320mm discs, CBS 6-piston calipers with ABS
Rear: Single 276mm disc, CBS two-piston caliper with ABS

Tires
Front: 120/70 ZR17 radial
Rear: 190/55 ZR17 radial
Wheelbase: 60.8 inches (1545mm)
Rake: 25-deg
Trail: 101.0mm (4.0 inches)
Seat Height: 32.1 inches (815mm)
Fuel Capacity: 4.9 gallons
Color: Candy Red

Curb Weight: 591 lbs (VFR1200F) / 613 lbs (VFR1200F with Dual Clutch Automatic Transmission)

Specifications 2010 Kawasaki Versys Kawasaki Sport

by 3:30 PM


2010 Kawasaki Versys Specifications:
  • Machine Type Four-stroke, liquid cooled, DOHC, four valves per cylinder, parallel twin

  • Displacement 649 cc

  • Bore & Stroke 83.0 x 60.0 mm

  • Compression ratio 10.6:1

  • Liquid Cooling

  • Fuel Injection Digital fuel injection with two 38mm Keihin throttle body

  • Digital CDI Ignition

  • 6-Speed Transmission

  • Final Drive O-Ring Chain

  • Frame Semi-double cradle, high tensile steel

  • Rake / Trail 25 degrees/4.3 entry

  • 120/70-17 front tire size

  • Rear Tire Size 160/60-17

  • Wheelbase 55.7

  • Front Suspension / Wheel Travel 41mm telescopic hydraulic fork with stepless rebound and preload adjusted / 5.9 in

  • Rear Suspension / wheel travel Single offset laydown shock with 13-position adjustable rebound damping and adjustable spring preload / 5.7 in

  • Front Brake Type Dual 300mm petal discs with two-piston caliper

  • Rear Brake Type Single 220mm petal disc with single-piston caliper

  • Fuel Tank Capacity 5.0 gal.

  • Seat Height 33.1

  • 454.1 pounds curb weight.

2010 Kawasaki Versys Review

by 3:30 AM
Kawasaki Versys specifications

After Kawasaki Versys first appeared in late 2006, sales were not quite as strong as the Kawasaki hopes, especially after that gathering good reviews.

Marketing people decided that this was because they would claim too much for the bike, suggested at that time shall be in accordance with anyone of the passengers for the Superbike riders.

Its more likely that the limp-looking tongue working against it, and while many motorists became convinced by the large capacity adventure bikes, the middle class version of this "high-rounders" still has some work to do to become fully accepted.

The loser not only a Kawasaki, but the raft riders who will get more than a Versys - and probably for less money - than they ended up buying a bike, because a motorcycle is always a good crack. I, for one, loved it and are happy to live with the Versys as the one my motorcycle, doing-everything.

Now the styling has been revised, while several other changes designed to address aspects of the Kawasaki motorcycle owners say they want to see improvements.

Now look more sharp, aggressive and confident, and less inclined to put people on the bike, and while the designers back on it they change the face of the screen to increase the wind protection and remove with the resonance annoying buzz that can happen in previous versions of the older models.

Some owners complained that suspension is too harsh, so it softened the 2009 version of the old model, and arrangements have been made to 2010, while the new rubber footrests and rear engine mounting rubber insulation has been added to reduce vibration reaching the rider and passenger, pillion also obtained wider seats.

There is a new end cap on the silencer and that was it, and everything works fine.
Sense of the motor is as it looks, tall and thin with a comfortable, ergonomic nature, underscoring why the types of bikes are becoming more and more popular as tourers, in addition to other tasks.
Rose upright position this is a good start, offering a good view of the commander to admire the scenery like that to see more from the roof of the car in traffic snarled-up.

The smoothness of the newly discovered at the cruising speed is a boon as well, especially power over anything from 55mph to 80mph, where nothing can pass through barriers intrusive vibration rubber.

There was a small increase in tingles at 4000 rpm on light throttle, but thats of concern.

This new model is significantly smoother than the old one - if nothing else to persuade owners of existing Versys, this alone makes it worth the upgrade.


Continue to produce its new screen as well, creating a wind shadow bigger than before with more smooth air flow, especially up to the highest position where the old is too volatile.

Mirrors are also new and offers a better view, partly because their area is larger at the outer edge but also because they are less blur with vibrations. You can still see the passengers elbow in it but thats just as well, as the man behind can feel a little difficult.

This chair may be wider, but overall it is still quite short and ridership was perched right at the back with nothing behind to provide support - on the side grab handles and the footrests are too far forward, aggravate the sensation.

A top box will assist in this, but then you can not enter the panniers, which means that the Versys is more suitable for a solo tour.

Additional mass will begin to stretch the ability of a bicycle brake as well. Stopper the solo adequate, with some sharpness to tame them intentionally to terminate the suspension rebounds from a long trip up and down too much when the brakes are often used. With more than their weight requires squeezing hard, so will be eligible for optional ABS.

Go alone down the winding road back, however, and not only brake to work, so is the rest of the bike.

Its nimble enough to throw around easily and where will the suspension soaked up the bumpy roughness with impressive capabilities - it lends to ride a bike excellent quality and speed when erect.

Rotating motor 10 500 rpm past the red line pretty fast bike ready and drive forward, but most owners will let him dwell in the low and mid range where there is enough performance for most situations and throttle response to give real pleasure.

It is important for all-round, 19-liter tank is good for 210 miles or more before the lead, thanks to the real world economy of about 50mpg.

Its unrealistic to go the distance and match the BMW GS (if not a cave-drunk GS Adventure), and soft rider will do better.

Two-up touring, then, is stretching the ability of the bike a little too far, but for other things that are very capable machine, with more than enough capability for most motorists who currently choose to GS. In fact, more obedient in the city and in general the situation closely.

Its also much cheaper, and with Honda Kawasaki to compete with the top spot in the league reliability, no doubt more reliable than German bike as well.

Versys If you missed the first time around, its really worth seeing a second - thats what gave the Kawasaki, so hopefully it will register on the radar more riders. Via: Kawasaki Versys Review

2010 Honda CBF1000 Motorcycle Model Sport Review

by 11:45 AM

2010 Honda CBF1000 Motorcycle

2010 Honda CBF1000 Motorcycle is a sport type vehicle. For this time Honda CBF1000 has a lot of improvement and development of the previous series. Framework is lighter and stronger aluminum base material that makes Honda CBF1000 much more nimble, fast and compact than previous models in doing good acceleration on the track straight and turn the winding. Honda CBF1000 technically have a machine with a capacity of 1000cc (998), Liquid-cooled inline-four, Valve Train Chain-driven DOHC, 4 valves per cylinder, Fuel Delivery PGM-FI electronic fuel injection. With the advanced technology that is embedded in this vehicle makes the 2010 Honda CBF1000 as the king / leader in its class. Its versatility takes the CBF concept to another level. Its specialties are not just adjustable components and handling that easily adapts to the riders skill level; but an impressively linear delivery that provides the rider wants powerthe exactly when its needed. If you are interested with this car so much better you first read the full information below. Read also the information about 2010 Honda CBF600ABS


2010 Honda CBF1000 Motorcycle


2010 Honda CBF1000 Motorcycle


2010 Honda CBF1000 Motorcycle


2010 Honda CBF1000 Motorcycle


2010 Honda CBF1000 Motorcycle







2010 Honda CBF1000 - Specifications
MSRP: $12,999

Engine Type Liquid-cooled inline-four
Displacement 998 cc
Bore & Stroke 75 mm x 56.5 mm
Compression Ratio 11.2:1
Valve Train Chain-driven DOHC, 4 valves per cylinder
Fuel Delivery PGM-FI electronic fuel injection
Transmission Six-speed
Final Drive O-ring-sealed chain; 16T/43T
Front Suspension 41 mm cartridge-type telescopic fork; 120 mm (4.7 inches) travel
Rear Suspension Pro-Link with gas-charged HMAS single shock; 120 mm (4.7 in.) travel
Tires 120/70ZR–17 radial front; 160/60ZR–17 radial rear
Brakes Front dual 296 mm discs with triple-piston calipers and Combined Braking System with ABS; rear 240 mm disc with single-piston caliper and ABS
Seat Height 795 mm (31.3 in.) adjustable +/- 15 mm (0.6 in.)
Wheelbase 1,495 mm (58.8 in.)
Curb Weight 245 kg (540 lb) including required fluids and full tank of gas – ready to ride
Fuel Capacity 20 litres
Colour Pearl Amber Yellow

FEATURES on 2010 Honda CBF1000 Motorcycle
- Ten percent more horsepower (106 vs. 97) but better fuel efficiency (+ 7 percent)
- Optional tough, weatherproof saddlebags store plenty of gear for all your adventures.
- New aluminum frame and revised suspension components make the CBF1000A more compact and improve handling.
- Instrument panel includes a fuel consumption gauge that displays average fuel consumption during a trip as well as indicating real-time fuel economy.
- The CBF1000As four-position adjustable windscreen and half fairing provide excellent weather protection without being bulky or confining.
- 998 cc fuel-injected 16-valve engine is tuned for a wide spread of power thats ideal for gruelling adventures or short commutes.
- The three-position height-adjustable seat adapts to your needs so you can cross the country in comfort.
- Strong and predictable Combined Braking System with ABS (Anti-lock Braking System) gives you the confidence to explore in all sorts of conditions.
- New fuel tank and larger capacity combined with the better fuel economy equals improved range.

2010 Kawasaki Z1000 by Roaring Toyz Review Specification

by 3:00 AM


2010 Kawasaki Z1000 by Roaring Toyz Review:

The Kawasaki Z1000 2010 has been one of the best Japanese nakeds around, but new ways to make better riders always found either by individuals or with the tuner. This place has a habit to develop an upgrade kit that govern the whole bike a mile away from its original state a new product that just came out the factory gates.

Roaring Toyz Take 2010 for example the case of the Kawasaki Z1000. This bike is given a set of Performance Machine wheels (front 17-inch, 18-inch rear), 240 rear tire, a suspension that is built and strengthened Brocks 4-2-1 exhaust, just to mention some of the most impressive new features.

Gold / silver paintjob does not help at setting a standard bike apart from the brothers, but what we like most about this project is the fact that it seems that the only way to do it in the first place Kawi. This is really one of those bikes that people see and ask "what shares and what is bad about it?

2010 Kawasaki Z1000 specifications by Roaring Toyz:
  • 0Roaring Toyz Custom 240 Wide Tire Suspension Stock Length w / Institute of Stealth

  • Performance Machine Judge Wheels 17x3.5 "Front 18x8.5" Rear

  • Custom Chrome Black / Chrome Finish Contrast on wheels that were applied by Sport Chrome Plating

  • Performance Brocks Alien Head Exhaust System Custom 4-2-1

  • Euro Components Clutch perch And Hand Control Lever, Front Brake Master, Reservoir and Lever

  • Euro Components Custom Mirrors

  • Roaring Toyz Chrome Plated Radial Mount Front Brake calipers

  • Roaring Toyz Radial rear brake rotor Custom Mount Kit, Billet

  • Radial Mount Hanger and Chrome R / T Radial Caliper

  • Roaring Toyz Chrome Billet Rear Brake Master Cylinder

  • Custom Hustler Roaring Toyz Billet anodized Black / Rubber grips

  • Chrome Roaring Toyz Arrow Point Bar Ends

  • Roaring Toyz Billet Fully Adjustable Lowering Link

  • Roaring Toyz Contrast Cut Black anodized Billet Kickstand

  • Roaring Toyz Stainless Steel Brake Lines Custom braided Translucent Yellow w / Stainless Ended

  • Roaring Toyz Billet Fuel Cap Black anodized Quick Release

  • Black anodized Vortex Rear Sets

  • Vortex 5 Contrast Cut Black Cat rear sprocket

  • Pirelli Diablo 240 Rear Tire & 120/70/17 Tires Front XXL

  • Lawstcaws Black Frame Plug

Powered by Blogger.